Za Vas smo dostupni od ponedeljka do petka od 8:00 do 17:00 časova. Preko ovog linka možete pronaći kontakt osobe za Vaš region.

Sedište u Wolfurtu
+43 5574 6706-0

Vaše kontakt osobe
Vaša poruka nama

Korpa {{ (warenkorbCtrl.warenkorb.bestellNummer ? (' [' + warenkorbCtrl.warenkorb.bestellNummer + '] ') : '' )}} | {{warenkorbCtrl.warenkorb.items.length}} Artikal   Izmena pregleda korpe


Slika Artikal kom. Cena za jedan komad Ukupna cena Ukupna cena uklj. popust

{{warenkorbItem.bezeichnung | artikelBezFilter:warenkorbItem.attributwertEingaben:[{attrPrefix: 'L_', searchPattern: '/...', replacePrefix: '/', replaceSuffix: ''}] }} {{warenkorbItem.bezeichnung | artikelBezFilter:warenkorbItem.attributwertEingaben}}





:  Prijavite se da biste videli svoje cene i nastavili da naručujete.

Clamping of workpieces with H 1080 clamping supports

Work pieces can be clamped in various ways. Our H 1080 clamping supports are a good option for clamping NF inserts as well as small and medium workpieces.

Machining Plates and bars Workshop equipment

Our clamping system for mould making firstly comprises the H 1080 clamping supports, which are screwed into the hole of the clamping plate. The system also comprises the H 1082 clamping spigots mounted into the prepared workpiece. The clamping spigots are clamped by the clamping supports in a purely mechanical manner using balls. In doing so, the workpiece is pressed during the clamping process with the mounted clamping spigots onto the flat surface supports of the clamping spigots.

H 1082 clamping spigots

H 1082 clamping spigots are available with diameters of 11.6 mm and 12 mm.

  • Clamping spigots with Ø 11.6 mm are used for NF inserts or workpieces, which are still subjected to a heat treatment process following machining. The fitting hole of the NF insert is subsequently expanded to Ø 12 mm, so that the clamping spigot can be used with Ø 12 mm for the clamping process of the rework.
  • For workpieces without heat treatment, the Ø 12 mm clamping spigots can be used immediately.

Clamping with the H 1080 clamping supports offers the option of machining workpieces on all five sides without interfering contours. Due to centring at the zero point, repeatable accuracy of the clamping is in the µ range.

H 20100 clamping plate with 20 mm grid

Flexible item-based clamping of workpieces in a 20 mm hole grid is enabled by the H 20100 clamping plate combined with H 1080 clamping supports.

  • One-off positioning of the clamping plate on the machine table by means of high-precision alignment edge

  • Positioning and mounting of the H 1080 clamping supports in the 20 mm hole grid

  • Reliable clamping of workpieces with repeatable accuracy with the specified fitting hole and threads into the clamping supports used

Lead times are shortened due to considerably reduced set-up times and programming is simplified by means of clamping without interfering contours.

Prepared plates for zero clamping system

With our clamping configurator you can quickly and easily order plates already equipped with holes for various zero clamping systems. Thanks to the preconfigured plates for the clamping system you are using (e.g. H 1082), nothing stands in the way of machining right away. A time-consuming changeover at the machine can also be avoided and costs for expensive machines and staff resources are saved.

To the clamping configurator


Da li imate otvoren nalog?

Ukoliko imate pristupne podatke za Meusburger portal, prijavite se ovde:

Izgubljena lozinka?

Novogenerisana lozinka je poslata i trebalo bi uskoro da se pojavi u vašem prijemnom sandučetu. Želimo vam uspešan dan.

Unesite Vašu e-mail adresu.
Poslaćemo Vam novu lozinku.

Kategorije proizvoda

Izaberite zemlju


Try our new version of 'My account'

Get familiar with our new ‘My account’ section and benefit from many advantages including: Get familiar with our new ‘My account’ section.
Keep selection
New version
Current version