Attachments for transfer and large dies

Centring units

The E 5304 and E 5305 Centring units enable exact centring and alignment of the upper and lower part.

E 5304 Centring unit, type A

E 5304 Centring unit with shim, type A

E 53041 Centring unit without shim, type A

E 53042 Shim, type A

E 5305 Centring unit, type B

E 5305 Centring unit with shim, type B

E 53051 Centring unit without shim, type B

E 53052 Shim, type B

Centring bolts

E 5345 Centring bolt

E 5346 Centring bolt with counterbore

Spacer plate and spacer

The toothed spacer plate is ideally suited for exact height adjustment of the upper and the lower part. The shift per tooth varies the height by 0.02 mm.

E 5310 Spacer plate, toothed, with shim

E 5300 Spacer

Fitting key

Fitting keys are used for absorbing shear forces. They are therefore ideally suited for the support and positioning of die components.

E 5350 Fitting key for transfer dies